Rectifiers Modular 24Vdc/48Vdc/125Vdc for Electrical Substations

You are here: Home » News » Rectifiers Modular 24Vdc/48Vdc/125Vdc for Electrical Substations

Rectifiers Modular 24Vdc/48Vdc/125Vdc for Electrical Substations

Views: 0 Author: Site Editor Publish Time: 2024-08-08 Origin: Site

Rectifiers modular 24Vdc/48Vdc/125Vdc is for the application of electrical substations to charge lead acid, Nickel Cadmio and LIFEP04 batteries.

Features:

1. Switch Mode Power Supply;

2. Hot swappable and Plug and Play;

3 .N+1 redundancy,each module available in 50A@48Vdc & 60A@24Vdc;

4 .AC /DC distribution system for AC input/ DC output distribution and protection;

5.RS232, RS485, SNMP communication for remote control;

6.Compact design and embedded modular system, support power system and module sleep, efficient mixing, energy saving;

7.High Efficiency with low EMI. CE Safety and EMC certification

8.Protection for Input and output over /under voltage,short circuit and over temperature

MODEL		A220/24-60M1	A220/24-180M3	A220/24-240M4	A220/24-360M6

Configuration		1pcs 24V/60A module +1pcs monitor	3pcs 24V/60A module +1pcs monitor	4pcs 24V/60A module +1pcs monitor	6pcs 24V/60A module +1pcs monitor
Environmental	Operating temperature	-40°C ~ 55°C
	Storage temperature	-40°C ~ 70°C
	Relative humidity	5%~95%RH（40±2℃，no condensation）
	Atmospheric pressure	62kPa~106kPa
	Altitude	≤ 2000m (derating is necessary above 2,000m)
AC Input	AC input system	L＋N＋PE/220Vac
	Input voltage range	90VAC ~ 290VAC
	Input AC voltage frequency	45Hz ~ 65Hz
	THD	＜5% （@230Vac，full load）
	Power factor	≥ 0.99
DC Output	Rated output voltage	24VDC
	Adjustable output voltage	20VDC-30VDC continuously adjustable
	System output current	60A	180A	240A	360A
	System load regulation	≤±0.5%
	System voltage	≤±0.5%
	System stability	≤±0.5%
	Efficiency	≥ 93.2%
	Current sharing	module current sharing not more than ±5％
	Weighted noise	≤ 2mV (300Hz ~ 3400Hz)
	Output distribution	MCB optional
Rectifier module unit	Rectifier hot-swap	Hot-swap available.not influencing system operation
	Rectifier indication	with operation.alarm.and fault indicators
	Soft start time	3s-10s
	Installation method	support swappable
	rectifier fault influence	Not influencing the set parameters of rectifier when rectifier at fault
Monitor module unit	Remote monitoring	With remote metering & remote control & remote signaling functions. providing standard RS485&TCP/IP Interface and 6 sets of the dry contact output port & Battery Temp.Sensor
	Language	Default: English
	Remote control	rectifier start and close.battery test. equalize and float charging ,DIN /DO configuration and so on
	Alarm functions	With AC over voltage/under voltage.DC voltage over/under.module Communication fault and over temperature alarm,Battery remove,Surge and so on
SAFTEY	Insulation resistance	Testing voltage 500VDC， Insulation Resistance ≥10M (normal atmospheric pressure, normal temperature, relative humidity <90%, no condensation)
	Insulation strength	Input to output: 3500VDC @1min&leak current ≤10mA Input to enclosures: 3500VDC @1min&leak current ≤10mA Output to enclosures:750VDC @1min&leak current ≤10mA
	System leak current	≤3.5mA（230Vac input）
	Grounding performance requirements	The system with operating ground and protection ground.with clear mark.the resistance between the enclosures of distribution and all palpable metal components and grounding nut is not more than 0.1Ω
	AC lightning protection	The equipment AC side can bear simulated lightning impulse Current of waveform 8/20μS and rated amplitude 40kA.(Optional)
	Noise	≤55dB (A) (measured at 1m distance from the equipment)
	MTBF	≥ 100000 hours

48V rectifier

MODEL		A220/48-50M1	A220/48-150M3	A220/48-200M4	A220/48-250M5	A220/48-300M6

Configuration		1pcs 48V/50A module +1pcs monitor	3pcs 48V/50A module +1pcs monitor	4pcs 48V/50A module +1pcs monitor	5pcs 48V/50A module +1pcs monitor	6pcs 48V/50A module +1pcs monitor
Environmental	Operating temperature	-40°C ~ 55°C
	Storage temperature	-40°C ~ 70°C
	Relative humidity	5%~95%RH（40±2℃，no condensation）
	Atmospheric pressure	62kPa~106kPa
	Altitude	≤ 2000m (derating is necessary above 2,000m)
AC Input	AC input system	L＋N＋PE/220Vac
	Input voltage range	90VAC ~ 290VAC
	Input AC voltage frequency	45Hz ~ 65Hz
	THD	＜5% （@230Vac，full load）
	Power factor	≥ 0.99
DC Output	Rated output voltage	48VDC
	Adjustable output voltage	40VDC-60VDC continuously adjustable
	System output current	50A	150A	200A	250A	300A
	System load regulation	≤±0.5%
	System voltage	≤±0.5%
	System stability	≤±0.5%
	Efficiency	≥ 93.2%
	Current sharing	module current sharing not more than ±5％
	Weighted noise	≤ 2mV (300Hz ~ 3400Hz)
	Output distribution	MCB optional
Rectifier module unit	Rectifier hot-swap	Hot-swap available.not influencing system operation
	Rectifier indication	with operation.alarm.and fault indicators
	Soft start time	3s-10s
	Installation method	support swappable
	rectifier fault influence	Not influencing the set parameters of rectifier when rectifier at fault
Monitor module unit	Remote monitoring	With remote metering & remote control & remote signaling functions. providing standard RS485&TCP/IP Interface and 6 sets of the dry contact output port & Battery Temp.Sensor
	Language	Default: English
	Remote control	rectifier start and close.battery test. equalize and float charging ,DIN /DO configuration and so on
	Alarm functions	With AC over voltage/under voltage.DC voltage over/under.module Communication fault and over temperature alarm,Battery remove,Surge and so on
SAFTEY	Insulation resistance	Testing voltage 500VDC， Insulation Resistance ≥10M (normal atmospheric pressure, normal temperature, relative humidity <90%, no condensation)
	Insulation strength	Input to output: 3500VDC @1min&leak current ≤10mA Input to enclosures: 3500VDC @1min&leak current ≤10mA Output to enclosures:750VDC @1min&leak current ≤10mA
	System leak current	≤3.5mA（230Vac input）
	Grounding performance requirements	The system with operating ground and protection ground.with clear mark.the resistance between the enclosures of distribution and all palpable metal components and grounding nut is not more than 0.1Ω
	AC lightning protection	The equipment AC side can bear simulated lightning impulse Current of waveform 8/20μS and rated amplitude 40kA.(Optional)
	Noise	≤55dB (A) (measured at 1m distance from the equipment)
	MTBF	≥ 100000 hours

MODEL		A400/125-60M3
MODEL		A400/125-60M3
Environmental	Operating temperature	-40°C ~ 55°C
	Storage temperature	-40°C ~ 70°C
	Relative humidity	≤ 90%RH (30°C)
	Communication	RS485 or SNMP
	Altitude	≤ 2000m (derating is necessary above 2,000m)
AC Input	AC input system	L1+L2+L3+N/380Vac
	Input voltage range	323-437VAC
	Input AC voltage frequency	45Hz ~ 65Hz
	Max input current	≤28.4A
	Power factor	≥ 0.99
DC Output	Nominal output voltage	110VDC
	Rated output voltage	125VDC
	Rated Output Capacity	7.5kW
	Output DC voltage	90VDC ~ -150VDC
	Output DC current	60A
	Voltage set-point accuracy	≤ 1%
	Efficiency	≥ 93.2%
	Noise (peak-peak)	≤ 200mV (0 ~ 20MHz)
	Weighted noise	≤ 2mV (300Hz ~ 3400Hz)
AC Input Alarm and Protection	AC input over-voltage alarm point	Default: 280VAC ± 5VAC*
	AC input under-voltage alarm point	Default: 176VAC ± 5VAC
	AC input over-voltage protection recovery difference	Default: 295VAC ± 5VAC, 10VAC lower than the AC input over-voltage protection point
	AC input under-voltage protection point	Default: 180VAC ± 5VAC*
DC Output Alarm And Protection	DC output over-voltage alarm point	Default:149VDC ± 0.5VDC*
	DC output under-voltage alarm point	Default:90VDC ± 0.5VDC*
	DC output over-voltage protection point	Default: 97.2VDC ± 0.5VDC*
	LLVD	Default: 99VDC ± 0.5VDC*
	BLVD	Default: 97.2VDC ± 0.5VDC*
Rectifier	Load sharing	The rectifiers can work in parallel and share the current. The unbalance is better than ± 5% rated output current.
Rectifier	Derated by input (at 45°C)	The rectifier can output power of 100% with input voltage of ≥154VAC; The rectifier can output power capacity 1200W with input voltage ＜154VAC; Rectifiers under-voltage stop with input voltage of 85VAC

Modular rectifiers Rectifiers Modular 24Vdc/48Vdc/125Vdc for Electrical Substations Rectifier Power Supply System Modular DC rectifier High Voltage Rectifiers Rectifiers manufacturer Industrial rectifier module Switch Mode Rectifier Switching Mode Rectifier Switchmode Power Supplies

Rectifiers Modular 24Vdc/48Vdc/125Vdc for Electrical Substations

ABOUT NASN

QUICK LINKS

PRODUCT CATEGORY

CONTACT US