1. Electrical Specifications

1.1 Input Characteristics

1.2 Output Characteristics

1.2.1 Output Voltage and Current Range Accuracy

1.2.2 Output Ripple and Noise

Note: Ripple and noise test: bandwidth setting at 20 MHz.

1.2.3 Power-On Output Delay Time

1.3 LED Indicators

Power LED indicators are installed on the power panel side. The output status is shown in the table below:

                   1.4 Communication Function

The module uses RS485 communication or CAN communication (one of two options). Main monitoring information of the module includes:

1) Voltage and current adjustment functions: meet the requirements of battery equalizing and floating charge, and voltage adjustment;

2) Single module on/off control；

3) Alarm information：

    Power failure: AC input overvoltage or undervoltage.；

    Module protection: Temperature warning；

Module fault: Output overvoltage shutdown, fan failure, over-temperature shutdown, or other internal module causes leading to no output (modules in sleep shutdown state and power failure do not report module faults).

1.5 Protection Functions

1.5.1 Output Overcurrent Protection

.

1.5.2 Output Short Circuit Protection

1.5.3 Output Overvoltage Protection

Note: Entering lock protection state requires disconnecting AC power and then re-powering on for the power supply to resume work.

1.5.4 Input Overvoltage Protection 

1.5.5 Input Undervoltage Protection

1.5.6 Output Power R eduction Protection

1.5.7 Over-temperature Protection

     1.6. Physical Dimensions