1. Parallel operation in single phase with up to 9 units. The maximum supported output power is 45.9KW/54KVA for 6KVA model and 27W/27KVA for 3KVA model.
2. Maximum nine units work together to support three-phase equipment. Seven units support one phase maximum. For 6KVA model, the maximum supported output power is 45.9KW/54KVA and one phase can be up to 35.7KW/42KVA. For 3KVA model, the maximum supported output power is 27W/27KVA and one phase can be up to 21KW/21KVA.
Table 1 Line Mode Specifications
MODEL | TM48-3KL | TM48-5KL | TM48-6KL |
Input Voltage Waveform | Sinusoidal | ||
Nominal Input Voltage | 230Vac | ||
Low Loss Voltage | 110Vac±7V | ||
Low Loss Return Voltage | 120Vac±7V | ||
High Loss Voltage | 280Vac±7V | ||
High Loss Return Voltage | 270Vac±7V | ||
Max AC Input Voltage | 300Vac | ||
Nominal Input Frequency | 50Hz / 60Hz (Auto detection) | ||
Low Loss Frequency | 46(56)±1Hz | ||
Low Loss Return Frequency | 46.5(57)±1Hz | ||
High Loss Frequency | 54(64)±1Hz | ||
High Loss Return Frequency | 53(63)±1Hz | ||
Power Factor | >0.98 | ||
Output Short Circuit Protection | Line mode: Circuit Breaker Battery mode: Electronic Circuits | ||
Efficiency (Line Mode) | 93% (Peak Efficiency) | ||
Transfer Time | Line modeßàBattery mode 0ms Line mode / Battery mode ßàBypass mode 4ms |
Table 2 Battery Mode Specifications
MODEL | TM48-3KL | TM48-5KL | TM48-6KL |
Rated Output Power | 3KVA/3KW | 5KVA/5KW | 6KVA/5.1KW |
Output Voltage Waveform | Pure Sine Wave | ||
Output Voltage Regulation | 220Vac±5% | ||
Output Frequency | 50Hz or 60Hz | ||
Peak Efficiency | 90% | ||
Overload Protection | 5s@≥150% load; 10s@105%~150% load | ||
Surge Capacity | 2* rated power for 5 seconds | ||
Nominal DC Input Voltage | 48Vdc | ||
Operating Range | 40Vdc -66Vdc | ||
Cold Start Voltage | 46Vdc | ||
Low DC Warning Voltage @ load < 50% @ load ≥ 50% |
45.0Vdc 44.0Vdc | ||
Low DC Warning Return Voltage @ load < 50% @ load ≥ 50% |
47.0Vdc 46.0Vdc | ||
High DC Recovery Voltage | 64Vdc | ||
High DC Cut-off Voltage | 66Vdc | ||
No Load Power Consumption | <67W @48V |
Table 3 Charge Mode Specifications
Utility Charging Mode | |||||
MODEL | TM48-3KL/TM48-5KL/TM48-6KL | ||||
Charging Current @ Nominal Input Voltage | Default: 10A, max: 60A | ||||
Bulk Charging Voltage | Flooded Battery | 58.4Vdc | |||
AGM / Gel Battery | 56.4Vdc | ||||
Floating Charging Voltage | 54Vdc | ||||
Overcharge Protection | 66Vdc | ||||
Charging Algorithm | 3-Step | ||||
Charging Curve |
Battery Voltage, per cell
2.43Vdc (2.35Vdc) 2.25Vdc
T0
Bulk (Constant Current) |
T1 T1 = 10* T0, minimum 10mins, maximum 8hrs
Absorption (Constant Voltage) |
Maintenance (Floating) |
Charging Current, %
Voltage
100%
50%
Current
Time |
Table 4 ECO/Bypass Mode Specifications
Bypass Mode | |
MODEL | TM48-3KL/TM48-5KL/TM48-6KL |
Input Voltage Waveform | Sinusoidal |
Low Loss Voltage | 176Vac±7V |
Low Loss Return Voltage | 186Vac±7V |
High Loss Voltage | 280Vac±7V |
High Loss Return Voltage | 270Vac±7V |
Nominal Input Frequency | 50Hz / 60Hz (Auto detection) |
Low Loss Frequency | 46(56)±1Hz |
Low Loss Return Frequency | 46.5(57)±1Hz |
High Loss Frequency | 54(64)±1Hz |
High Loss Return Frequency | 53(63)±1Hz |
MODEL | TM48-3KL/TM48-5KL/TM48-6KL |
Parallel-able | YES |
Communication | RS232 and USB |
Safety Certification | CE |
Operating Temperature Range | 0°C to 55°C |
Storage temperature | -15°C~ 60°C |
Humidity | 5% to 95% Relative Humidity (Non-condensing) |
Dimension (D*W*H), mm | 420 x 438 x 130.8 |
Net Weight, kg | 15 |
Product appearance
1. LCD display
2. Bypass indicator
3. Status indicator
4. Charging indicator
5. Fault indicator
6. Function keys (Please refer to operation chapter for the detailed operation)
7. AC input terminals
8. AC output terminals
9. Grounding terminal
10. Battery input
11. Circuit breaker
12. RS-232 communication port
13. USB communication port
14. EPO port (Emergency power off)
15. Parallel communication port (only for parallel model)
16. Current sharing port (only for parallel model)
17. Intelligent slot
1. Parallel operation in single phase with up to 9 units. The maximum supported output power is 45.9KW/54KVA for 6KVA model and 27W/27KVA for 3KVA model.
2. Maximum nine units work together to support three-phase equipment. Seven units support one phase maximum. For 6KVA model, the maximum supported output power is 45.9KW/54KVA and one phase can be up to 35.7KW/42KVA. For 3KVA model, the maximum supported output power is 27W/27KVA and one phase can be up to 21KW/21KVA.
Table 1 Line Mode Specifications
MODEL | TM48-3KL | TM48-5KL | TM48-6KL |
Input Voltage Waveform | Sinusoidal | ||
Nominal Input Voltage | 230Vac | ||
Low Loss Voltage | 110Vac±7V | ||
Low Loss Return Voltage | 120Vac±7V | ||
High Loss Voltage | 280Vac±7V | ||
High Loss Return Voltage | 270Vac±7V | ||
Max AC Input Voltage | 300Vac | ||
Nominal Input Frequency | 50Hz / 60Hz (Auto detection) | ||
Low Loss Frequency | 46(56)±1Hz | ||
Low Loss Return Frequency | 46.5(57)±1Hz | ||
High Loss Frequency | 54(64)±1Hz | ||
High Loss Return Frequency | 53(63)±1Hz | ||
Power Factor | >0.98 | ||
Output Short Circuit Protection | Line mode: Circuit Breaker Battery mode: Electronic Circuits | ||
Efficiency (Line Mode) | 93% (Peak Efficiency) | ||
Transfer Time | Line modeßàBattery mode 0ms Line mode / Battery mode ßàBypass mode 4ms |
Table 2 Battery Mode Specifications
MODEL | TM48-3KL | TM48-5KL | TM48-6KL |
Rated Output Power | 3KVA/3KW | 5KVA/5KW | 6KVA/5.1KW |
Output Voltage Waveform | Pure Sine Wave | ||
Output Voltage Regulation | 220Vac±5% | ||
Output Frequency | 50Hz or 60Hz | ||
Peak Efficiency | 90% | ||
Overload Protection | 5s@≥150% load; 10s@105%~150% load | ||
Surge Capacity | 2* rated power for 5 seconds | ||
Nominal DC Input Voltage | 48Vdc | ||
Operating Range | 40Vdc -66Vdc | ||
Cold Start Voltage | 46Vdc | ||
Low DC Warning Voltage @ load < 50% @ load ≥ 50% |
45.0Vdc 44.0Vdc | ||
Low DC Warning Return Voltage @ load < 50% @ load ≥ 50% |
47.0Vdc 46.0Vdc | ||
High DC Recovery Voltage | 64Vdc | ||
High DC Cut-off Voltage | 66Vdc | ||
No Load Power Consumption | <67W @48V |
Table 3 Charge Mode Specifications
Utility Charging Mode | |||||
MODEL | TM48-3KL/TM48-5KL/TM48-6KL | ||||
Charging Current @ Nominal Input Voltage | Default: 10A, max: 60A | ||||
Bulk Charging Voltage | Flooded Battery | 58.4Vdc | |||
AGM / Gel Battery | 56.4Vdc | ||||
Floating Charging Voltage | 54Vdc | ||||
Overcharge Protection | 66Vdc | ||||
Charging Algorithm | 3-Step | ||||
Charging Curve |
Battery Voltage, per cell
2.43Vdc (2.35Vdc) 2.25Vdc
T0
Bulk (Constant Current) |
T1 T1 = 10* T0, minimum 10mins, maximum 8hrs
Absorption (Constant Voltage) |
Maintenance (Floating) |
Charging Current, %
Voltage
100%
50%
Current
Time |
Table 4 ECO/Bypass Mode Specifications
Bypass Mode | |
MODEL | TM48-3KL/TM48-5KL/TM48-6KL |
Input Voltage Waveform | Sinusoidal |
Low Loss Voltage | 176Vac±7V |
Low Loss Return Voltage | 186Vac±7V |
High Loss Voltage | 280Vac±7V |
High Loss Return Voltage | 270Vac±7V |
Nominal Input Frequency | 50Hz / 60Hz (Auto detection) |
Low Loss Frequency | 46(56)±1Hz |
Low Loss Return Frequency | 46.5(57)±1Hz |
High Loss Frequency | 54(64)±1Hz |
High Loss Return Frequency | 53(63)±1Hz |
MODEL | TM48-3KL/TM48-5KL/TM48-6KL |
Parallel-able | YES |
Communication | RS232 and USB |
Safety Certification | CE |
Operating Temperature Range | 0°C to 55°C |
Storage temperature | -15°C~ 60°C |
Humidity | 5% to 95% Relative Humidity (Non-condensing) |
Dimension (D*W*H), mm | 420 x 438 x 130.8 |
Net Weight, kg | 15 |
Product appearance
1. LCD display
2. Bypass indicator
3. Status indicator
4. Charging indicator
5. Fault indicator
6. Function keys (Please refer to operation chapter for the detailed operation)
7. AC input terminals
8. AC output terminals
9. Grounding terminal
10. Battery input
11. Circuit breaker
12. RS-232 communication port
13. USB communication port
14. EPO port (Emergency power off)
15. Parallel communication port (only for parallel model)
16. Current sharing port (only for parallel model)
17. Intelligent slot