AC07KD,AC11KD,AC22KD
NASN
8504
AC EV Charger
4m
54
Availability: | |
---|---|
This AC charging station, mainly used for AC slow charge of electric vehicles. The product is composed of charging casing, wall-hanging backboard, floor-to-ground column (optional), etc., with charging protection, charging by swiping card, charging by scanning code, mobile payment,networking monitoring and other functions.This product adopts industrial design principle, easy to install and easy to use.
Compatiable with all electric vehicles, including e-bus and e- trunk. These intelligent units are managed remotely over Ethernet access to the internet or OCPP service to operate. Ideal for commercial locations, such as car parks, retail and business parks, hotels and fleet depots.
Model | AC07KD | AC11KD | AC22KD |
Input power connection | 1Ph + N + PE(L1, N, PE) | 3Ph + N + PE(L1, L2, L3, N, PE) | |
AC input voltage | 220 VAC ± 15% | 400VAC± 15% | |
AC input frequency | 50 / 60 Hz | ||
Maximum input current | 32A | 16A | 32A |
Charging interface | GB/T +Type2/Type1, Type1+Type2 | ||
Rated power | 7KW | 11kw | 22kw |
Output voltage | 220 VAC ± 15% | 400VAC± 15% | |
Maximum output current | 32A | 16A | 32A |
Connect method | Tethered Nominal 5 m OPT Single plug/Dual plugs | ||
Input cable | N/A | ||
HMI | 4.3 inch LCD Touch screen | ||
Signal indicator | YES | ||
Standards | IEC/EN 61851-1: 2019 IEC/EN61851-21-2 :2021 EN 60335-1:2012+A15:2021EN 60335-2-65:2003+A12:2022 | ||
Communication protocol | Optional | ||
RFID | Optional | ||
Internet connection | No/Optional OCPP(Wifi/4G/LAN) | ||
Energy meter | No/Optional | ||
Dimension | Product:W378 D320 H1362mm Pack:W400 D460 H1442mm | ||
Weight | G.W:~27kg N.W:~25kg | ||
Protection level | IP55 | ||
Operating temperature | -25℃ ~ +50℃ | ||
Storage temperature | -40℃~+65 ℃ | ||
Relative humidity | 5% ~ 95%, no condensation | ||
Altitude | ≤ 2000 m | ||
Cooling method | Natural | ||
Usage Ambient | Indoor or Outdoor |
This AC charging station, mainly used for AC slow charge of electric vehicles. The product is composed of charging casing, wall-hanging backboard, floor-to-ground column (optional), etc., with charging protection, charging by swiping card, charging by scanning code, mobile payment,networking monitoring and other functions.This product adopts industrial design principle, easy to install and easy to use.
Compatiable with all electric vehicles, including e-bus and e- trunk. These intelligent units are managed remotely over Ethernet access to the internet or OCPP service to operate. Ideal for commercial locations, such as car parks, retail and business parks, hotels and fleet depots.
Model | AC07KD | AC11KD | AC22KD |
Input power connection | 1Ph + N + PE(L1, N, PE) | 3Ph + N + PE(L1, L2, L3, N, PE) | |
AC input voltage | 220 VAC ± 15% | 400VAC± 15% | |
AC input frequency | 50 / 60 Hz | ||
Maximum input current | 32A | 16A | 32A |
Charging interface | GB/T +Type2/Type1, Type1+Type2 | ||
Rated power | 7KW | 11kw | 22kw |
Output voltage | 220 VAC ± 15% | 400VAC± 15% | |
Maximum output current | 32A | 16A | 32A |
Connect method | Tethered Nominal 5 m OPT Single plug/Dual plugs | ||
Input cable | N/A | ||
HMI | 4.3 inch LCD Touch screen | ||
Signal indicator | YES | ||
Standards | IEC/EN 61851-1: 2019 IEC/EN61851-21-2 :2021 EN 60335-1:2012+A15:2021EN 60335-2-65:2003+A12:2022 | ||
Communication protocol | Optional | ||
RFID | Optional | ||
Internet connection | No/Optional OCPP(Wifi/4G/LAN) | ||
Energy meter | No/Optional | ||
Dimension | Product:W378 D320 H1362mm Pack:W400 D460 H1442mm | ||
Weight | G.W:~27kg N.W:~25kg | ||
Protection level | IP55 | ||
Operating temperature | -25℃ ~ +50℃ | ||
Storage temperature | -40℃~+65 ℃ | ||
Relative humidity | 5% ~ 95%, no condensation | ||
Altitude | ≤ 2000 m | ||
Cooling method | Natural | ||
Usage Ambient | Indoor or Outdoor |