 |
An Online UPS output is independent of voltage and frequency variations of the mains.
Offers the highest level of critical load protection as the load is supplied with closely regulated power at all times
Has a load break of less than 5ms when transferring between inverter and bypass
Is totally transparent to the load in the case of a mains failure
Is the most expensive capital cost of UPS systems
Has a higher running cost than other types of system, as the rectifier and inverter are permanently on load.
Parameters:
| MODEL | UPR-XKS | ||||||
| Output Power | 3-5KVA | 6-15KVA | 6-15KVA | 20-30KVA | 40-60KVA | 80- 120KVA | |
| Input | AC input Voltage | AC220V±25% | AC220V±25% | AC380V±25% | AC380V±25% | AC380V±25% | AC380V±25% |
| DC input Voltage | DC220V / DC192V / DC110V | ||||||
| Frequency | 50Hz±10% | ||||||
| Output | Output Voltage | AC220V±1% | |||||
| Frequency | 50Hz±0.5% | ||||||
| Wave Form | 100% pure sine wave, linear load harmonic distortion rate<3% | ||||||
| Overload response | plus-minus protection | ||||||
| Power Factor | 0.8 | ||||||
| Crest Factor | 3:01 | ||||||
| Efficiency | ≥90% | ||||||
| Transform Time | 0ms | ||||||
| Protection | Wrong wiring | Protect and Sound & light alarm | |||||
| Overload | First level sound and light alarm, second level automatic bypass output after 60 seconds, automatically restored after reducing load | ||||||
| Short Circuit | System automatically switches to bypass output, sound and light alarm | ||||||
| Fault | System automatically switches to bypass output, sound and light alarm | ||||||
| Electromagnetic immunity/compatibility | Meet GB 7260.2 | ||||||
| Display | LCD screen | Input/output Parameters, Voltage, Current, Frequency, etc | |||||
| Indicator | Inverter state, output state, overload, fault | ||||||
| Alarm | AC input Abnormal | Sound and light alarm. Beep and display screen alarm simultaneously | |||||
| DC input Abnormal | Sound and light alarm. Beep and display screen alarm simultaneously | ||||||
| Bypass Abnormal | Sound and light alarm. Beep and display screen alarm simultaneously | ||||||
| Overload | First level protection sound and light alarm, second level protection sound and light alarm | ||||||
| System Failure | long-beep | ||||||
| Communication | RS485 | Modbus standard Protocol | |||||
| Dry Contact | Inverter state, bypass state, fault+AC abnormality, DC abnormality, device overload+backup | ||||||
| Environment | Working Temperature | -5℃~40℃ | |||||
| Relative Humidity | 0-95% No condensation | ||||||
| Insulation Strength | 1500VAC 1min(input/output) | ||||||
| Cooling Method | Forced Fans Cooling | ||||||
| Noise | ＜50dB At a distance of 1 meter from the front of the device | ||||||
| Dimension | 509*178*469mm | 509*267*469mm | 509*356*469mm | Cutomized | |||
| Features: | ||||||||||||
1. Dual transformation online design, including output isolation transformer; 2. Wide input voltage design, excellent grid adaptability; 3. Zero switching time, pure sine wave output; 4. Durable and reliable industrial design with strong load compatibility; 5. DC emergency start function; 6. Complete protection functions, standard lightning protection and surge protection; 7. Intelligent monitoring function, optional backup SNMP card: 8. Large screen high-definition LCD and graphic display; 9. Fully meet the load jump from 0 to 100%. | ||||||||||||
An Online UPS output is independent of voltage and frequency variations of the mains.
Offers the highest level of critical load protection as the load is supplied with closely regulated power at all times
Has a load break of less than 5ms when transferring between inverter and bypass
Is totally transparent to the load in the case of a mains failure
Is the most expensive capital cost of UPS systems
Has a higher running cost than other types of system, as the rectifier and inverter are permanently on load.
Parameters:
| MODEL | UPR-XKS | ||||||
| Output Power | 3-5KVA | 6-15KVA | 6-15KVA | 20-30KVA | 40-60KVA | 80- 120KVA | |
| Input | AC input Voltage | AC220V±25% | AC220V±25% | AC380V±25% | AC380V±25% | AC380V±25% | AC380V±25% |
| DC input Voltage | DC220V / DC192V / DC110V | ||||||
| Frequency | 50Hz±10% | ||||||
| Output | Output Voltage | AC220V±1% | |||||
| Frequency | 50Hz±0.5% | ||||||
| Wave Form | 100% pure sine wave, linear load harmonic distortion rate<3% | ||||||
| Overload response | plus-minus protection | ||||||
| Power Factor | 0.8 | ||||||
| Crest Factor | 3:01 | ||||||
| Efficiency | ≥90% | ||||||
| Transform Time | 0ms | ||||||
| Protection | Wrong wiring | Protect and Sound & light alarm | |||||
| Overload | First level sound and light alarm, second level automatic bypass output after 60 seconds, automatically restored after reducing load | ||||||
| Short Circuit | System automatically switches to bypass output, sound and light alarm | ||||||
| Fault | System automatically switches to bypass output, sound and light alarm | ||||||
| Electromagnetic immunity/compatibility | Meet GB 7260.2 | ||||||
| Display | LCD screen | Input/output Parameters, Voltage, Current, Frequency, etc | |||||
| Indicator | Inverter state, output state, overload, fault | ||||||
| Alarm | AC input Abnormal | Sound and light alarm. Beep and display screen alarm simultaneously | |||||
| DC input Abnormal | Sound and light alarm. Beep and display screen alarm simultaneously | ||||||
| Bypass Abnormal | Sound and light alarm. Beep and display screen alarm simultaneously | ||||||
| Overload | First level protection sound and light alarm, second level protection sound and light alarm | ||||||
| System Failure | long-beep | ||||||
| Communication | RS485 | Modbus standard Protocol | |||||
| Dry Contact | Inverter state, bypass state, fault+AC abnormality, DC abnormality, device overload+backup | ||||||
| Environment | Working Temperature | -5℃~40℃ | |||||
| Relative Humidity | 0-95% No condensation | ||||||
| Insulation Strength | 1500VAC 1min(input/output) | ||||||
| Cooling Method | Forced Fans Cooling | ||||||
| Noise | ＜50dB At a distance of 1 meter from the front of the device | ||||||
| Dimension | 509*178*469mm | 509*267*469mm | 509*356*469mm | Cutomized | |||
| Features: | ||||||||||||
1. Dual transformation online design, including output isolation transformer; 2. Wide input voltage design, excellent grid adaptability; 3. Zero switching time, pure sine wave output; 4. Durable and reliable industrial design with strong load compatibility; 5. DC emergency start function; 6. Complete protection functions, standard lightning protection and surge protection; 7. Intelligent monitoring function, optional backup SNMP card: 8. Large screen high-definition LCD and graphic display; 9. Fully meet the load jump from 0 to 100%. | ||||||||||||
V2V Vehicle To Vehicle 
6kW V2H Vehicle To Home 
Solar EV Charger System 
60kW 
120KW-200KW 
240KW Ultra Fast EV Charger With CCS2 
Electric Froklift Charger 
mini AC EV Charger 
7kW AC EV Charger 
22kW Pedestal AC Charger 
EV plug for Tesla 
CHAdeMo EV plug 
CCS 2 EV Charger Plug 
CCS1 EV Charger Plug 
CCS2 Plug dummy holder 
CCS1 plug dummy holder 
GB/T plug dummy holder 
GB/T plug EV inlet 
CCS 1 inlet on EV Car 
AC Type e-bike charger 
DC Type e-bike charger 
500w Portable POWER STATION Built in Lithium Iron Phosphate Battery 
10 Inch Portable Battery Speaker 
15 Inch Trolley Battery Speaker 
Battery Guitar Speaker 
10 Inch Stage Battery Speaker 
Multi-function Battery Speaker 
LiFePO4 Battery cell 
24V 150ah LiFePO4 Battery Pack E-Boat Uninterrupted Power Supply 
110VDC Utility Inverter 
48VDC power frequency inverter 
24VDC power frequency inverter 
110VDC power frequency inverter 
24VDC B series Modular Rack Mount Rectifier System 
48VDC B series Modular Rack Mount Rectifier System 
48V DC DC converter 
24V DC-DC converter 
