Rack-mounted hybrid solar inverter 5kW 220Vac

Share to:

Rack-mounted hybrid solar inverter 3kW 110Vac

Model:
SH48V3KW110
Brand:
NASN POWER
Output Power:
3kW
Efficiency:
80%
Output Voltage Range:
Single phase 110/120 Vac

Availability:



Inquire

Product Description

Features of Hybrid Solar Inverters:

Pure sine wave inverter

Inverter running without battery

Built-in MPPT solar controller

Configurable input voltage range for home appliances and personal computers via LCD setting

Configurable battery charging current based on applications via LCD setting

Configurable AC/Solar Charger priority via LCD setting

Compatible to mains voltage or generator power

Auto restart while AC is recovering

Overload/ Over temperature/ short circuit protection

Smart battery charger design for optimized battery performance

Cold start function

This inverter can power all kinds of appliances in home or office environment, including motor-type appliances such as tube light, fan, refrigerator and air conditioner.

Rack mount solar hybrid inverter

Installation

Battery Connection

CAUTION: For safety operation and regulation compliance, it’s requested to install a separate DC over-current protector or disconnect device between battery and inverter. It may not be requested to have a disconnect device in some applications, however, it’s still requested to have over-current protection installed.

AC Input/Output Connection

CAUTION!! There are two terminal blocks with “IN” and “OUT” markings. Please do NOT mis-connect input and output connectors.

PV Connection

CAUTION: Before connecting to PV modules, please install separately a DC circuit breaker between inverter and PV modules.

SPECIFICATIONS

Table 1 Line Mode Specifications

INVERTER MODEL	3KW
Input Voltage Waveform	Sinusoidal (utility or generator)
Nominal Input Voltage	120Vac
Low Loss Voltage	95Vac±7V (UPS) 65Vac±7V (Appliances)
Low Loss Return Voltage	100Vac±7V (UPS); 70Vac±7V (Appliances)
High Loss Voltage	140Vac±7V
High Loss Return Voltage	135Vac±7V
Max AC Input Voltage	150Vac
Nominal Input Frequency	50Hz / 60Hz (Auto detection)
Low Loss Frequency	40±1Hz
Low Loss Return Frequency	42±1Hz
High Loss Frequency	65±1Hz
High Loss Return Frequency	63±1Hz
Output Short Circuit Protection	Line mode: Circuit Breaker Battery mode: Electronic Circuits
Efficiency (Line Mode)	>95% ( Rated R load, battery full charged )
Transfer Time	10ms typical (UPS); 20ms typical (Appliances)
Output power derating: When AC input voltage drops to 95V or 170V depending on models, the output power will be derated.

Table 2 Inverter Mode Specifications

INVERTER MODEL	3KVW
Rated Output Power	3KW
Output Voltage Waveform	Pure Sine Wave
Output Voltage Regulation	110/120Vac±5%
Output Frequency	60Hz or 50Hz
Peak Efficiency	94%
Overload Protection	5s@≥150% load;10s@110%~150% load
Surge Capacity	2* rated power for 5 seconds
Nominal DC Input Voltage	48Vdc
Cold Start Voltage	46.0Vdc
Low DC Warning Voltage @ load < 20% @ 20% ≤ load < 50% @ load ≥ 50%	44.0Vdc 42.8Vdc 40.4Vdc
Low DC Warning Return Voltage @ load < 20% @ 20% ≤ load < 50% @ load ≥ 50%	46.0Vdc 44.8Vdc 42.4Vdc
Low DC Cut-off Voltage @ load < 20% @ 20% ≤ load < 50% @ load ≥ 50%	42.0Vdc 40.8Vdc 38.4Vdc

Table 3 Charge Mode Specifications

Utility Charging Mode
INVERTER MODEL		3KW
Max Charging Current (PV+AC)		60Amp (@ V_I/P=230Vac)
Max Charging Current (AC)		80Amp (@ V_I/P=230Vac)
Bulk Charging Voltage	Flooded Battery	58.4Vdc
	AGM / Gel Battery	56.4Vdc
Floating Charging Voltage		54Vdc
Overcharge Protection		63Vdc
Charging Algorithm		3-Step
Charging Curve
Solar Input
INVERTER MODEL		3KW
Rated Power		3000W
Max. PV Array Open Circuit Voltage		500Vdc
PV Array MPPT Voltage Range		60Vdc~450Vdc
Max. Input Current		18A
Max.Charging Current(PV)		80A

Table 4 General Specifications

INVERTER MODEL	3KW
Safety Certification	CE
Operating Temperature Range	-10°C to 55°C
Storage temperature	-15°C~ 60°C
Humidity	5% to 95% Relative Humidity (Non-condensing)
Dimension *(DWH), mm*	438x438x130.8
Net Weight, kg	14

Parallel Operation in Single phase

Max 12 units can be paralleled in single phase connection.

Support 3-phase equipment

Max 4 units in each phase can be paralleled in three phase connection. Total 12 units.

Support split phase

Parallel communication

Note: It’s up to customer’s demand to pick 11 inverters on any phase.

2P1: L1-phase, 2P2: L2-phase,

N=N1+N2, Nmax=12units

19inch rack Solar Hybrid Inverter Rack-mounted hybrid solar inverter Hybrid Solar Inverters Hybrid energy inverter Hybrid inverter system Smart hybrid inverter Hybrid solar power inverter Hybrid solar solution Solar-battery hybrid inverter On Grid Solar Hybrid Inverter

Rack-mounted hybrid solar inverter 3kW 110Vac

Features of Hybrid Solar Inverters:

This inverter can power all kinds of appliances in home or office environment, including motor-type appliances such as tube light, fan, refrigerator and air conditioner.

Battery Connection

SPECIFICATIONS

Table 1 Line Mode Specifications

Table 2 Inverter Mode Specifications

Table 3 Charge Mode Specifications

Table 4 General Specifications

Features of Hybrid Solar Inverters:

This inverter can power all kinds of appliances in home or office environment, including motor-type appliances such as tube light, fan, refrigerator and air conditioner.

Battery Connection

SPECIFICATIONS

Table 1 Line Mode Specifications

Table 2 Inverter Mode Specifications

Table 3 Charge Mode Specifications

Table 4 General Specifications

ABOUT NASN

QUICK LINKS

PRODUCT CATEGORY

CONTACT US