48V Hybrid Solar Power Telecom System

You are here: Home » News » 48V Hybrid Solar Power Telecom System

48V Hybrid Solar Power Telecom System

Views: 0 Author: Site Editor Publish Time: 2024-12-09 Origin: Site

NASN POWER 48V Hybrid Solar Power Telecom System project application in Colombia. 48V Hybrid Solar Power Telecom System is composed of 48Vdc hybrid rectifier system, 48Vdc to 125Vdc converter,48Vdc to 120Vac telecom inverter.

48V Hybrid Solar Power Telecom System Cabinet

48V Hybrid power system

48Vdc hybrid rectifier system

48V hybrid telecom rectifier

MODEL		B220/48-100M2HG	B220/48-200M4HG	B220/48-100M2M	B220/48-200M4M

Configuration		1pcs 48V/50A AC/DC module +1pcs T4850HG MPPT module	2pcs 48V/50A AC/DC module +2pcs T4850HG MPPT module	1pcs 48V/50A AC/DC module +1pcs T4850M MPPT module	2pcs 48V/50A AC/DC module +2pcs T4850M MPPT module
Environmental	Operating temperature	-40°C ~ 55°C
	Storage temperature	-40°C ~ 70°C
	Relative humidity	5%~95%RH（40±2℃，no condensation）
	Atmospheric pressure	62kPa~106kPa
	Altitude	≤ 2000m (derating is necessary above 2,000m)
Input	Rated Input Voltage	AC:110VAC / 220VAC PV:120VDC~340VDC		AC:110VAC / 220VAC PV:58VDC~120VDC
	Voltage range	AC:85VAC~300VAC PV:120VDC~400VDC		AC:85VAC~300VAC PV:58VDC~150VDC
	Frequency	45Hz ~ 65Hz
	THD	＜5% （@230Vac，full load）
	Power factor	≥ 0.99
DC Output	Rated output voltage	48VDC
	Adjustable output voltage	40VDC-60VDC continuously adjustable
	System output current	100A	200A	100A	200A
	System load regulation	≤±0.5%
	System voltage	≤±0.5%
	System stability	≤±0.5%
	Efficiency	≥ 93.2%
	Current sharing	module current sharing not more than ±5％
	Weighted noise	≤ 2mV (300Hz ~ 3400Hz)
	Output distribution	MCB optional
Rectifier module unit	Rectifier hot-swap	Hot-swap available.not influencing system operation
	Rectifier indication	with operation.alarm.and fault indicators
	Soft start time	3s-10s
	Installation method	support swappable
	rectifier fault influence	Not influencing the set parameters of rectifier when rectifier at fault
Monitor module unit	Remote monitoring	With remote metering & remote control & remote signaling functions. providing standard RS485&TCP/IP Interface and 6 sets of the dry contact output port & Battery Temp.Sensor
	Language	Default: English
	Remote control	rectifier start and close.battery test. equalize and float charging ,DIN /DO configuration and so on
	Alarm functions	With AC over voltage/under voltage.DC voltage over/under.module Communication fault and over temperature alarm,Battery remove,Surge and so on
SAFTEY	Insulation resistance	Testing voltage 500VDC， Insulation Resistance ≥10M (normal atmospheric pressure, normal temperature, relative humidity <90%, no condensation)
	Insulation strength	Input to output: 3500VDC @1min&leak current ≤10mA Input to enclosures: 3500VDC @1min&leak current ≤10mA Output to enclosures:750VDC @1min&leak current ≤10mA
	System leak current	≤3.5mA（230Vac input）
	Grounding performance requirements	The system with operating ground and protection ground.with clear mark.the resistance between the enclosures of distribution and all palpable metal components and grounding nut is not more than 0.1Ω
	AC lightning protection	The equipment AC side can bear simulated lightning impulse Current of waveform 8/20μS and rated amplitude 40kA.(Optional)
	Noise	≤55dB (A) (measured at 1m distance from the equipment)
	MTBF	≥ 100000 hours

48Vdc to 125Vdc converter

48VDC to 120VDC CONVERTER

48Vdc to 120Vac telecom inverter

48VDC to 120VAC inverter 1kva with SNMP

48V DC hybrid Rectifier System 48V DC hybrid System 48V DC hybrid UPS System 48V Hybrid Solar Power System 48V hybrid telecom rectifier 48VDC battery charger rectifier system with SNMP 48VDC Hybrid Soalr Power System 48vdc hybrid telecom power system 48Vdc hybrid telecom rectifier system 48VDC MPPT Off-Grid Telecom Station Solar hybrid system

ABOUT NASN

GUANGZHOU NASN POWER CO.,LTD is a professional EV charger, DC power supply and battery storage solution provider and enterprise in China, a wholly owned subsidy of NASN ELECTRONICS (HONGKONG) CO., LIMITED.

ISO9001

QUICK LINKS

PRODUCT CATEGORY

CONTACT US

   Contact person : Florence
   Tell : +86-20-86857678
   Phone : +86-135 1058 5626
    QQ : 28243245
    E-mail : info@nasn.cn