3.3kW E-forklift Charger

Electric Forklift Charger

If the battery drops below 20% discharge, it may experience negative performance issues such as:

• Sulfation build-up

• Battery overheating

• Stratification

These effects can combine to cause damage to your forklift, increase battery maintenance costs, and shorten the battery’s lifespan.

Fast charging partially charges your forklift’s battery during opportune moments, usually during breaks or between shifts, but at a quicker rate such as 20 to 30 minutes.

It’s similar to opportunity charging but with a difference in the start rate of the chargers.

48V forklift Battery Charger,

24V forklift Battery Charger

• Communication:WIFI,4G,OCPP 

• Wall-mounted: For commercial application 

• Customized solution: Support customization 

• Wide output voltage:0~100V

  
  

  
  

  Advantage of Fast Charging

• Charge fast to reduce downtime and improve productivity

  No need to swap batteries

  No need for costly battery storage areas

• Item	Content	NEC-24
  AC input	Input Type	Single phase
  	Rated Voltage	220VAC
  DC output	Output Voltage	16~32V
  	Maximum Current	100A@16-32Vdc
  	Rated Power	3.3kW
  User Interface	Charge Connector	GB/T, REMA AND ANDERSON FOR OPTION
  	Cable Length	3m or Customized
  	LCD Display	4.3-inch
  	RFID Reader	MifareISO/IEC14443A
  	Start Mode	Plug&Charge/RFID Card
  Communication	Backend	Wi-Fi /4G
  	Charging protocol	OCPP-1.6J optional
  Safety	Ingress Protection	IP45
  	Impact Protection	IK10
  	Electrical Protection	Over/Under Voltage Protection,Over Current Protection, Short Circuit protection, Over/Under Temperature Protection,Surge protection
  Environment	Installation	Wall-mount/Pole-mount(Optional)
  	Operate Temperature	-30℃ ~ +50℃
  	Operate Humidity	95%，Non-condensing
  	Operate Altitude	<2000m
  Mechanical	Dimension (mm)	L454*D200*H644